Be the first to review this product
This tool allows the reloader to remove the unevenness in the nose of the bullet. This results in consistent projectiles, tighter groups and increased long range consistency. One-piece, stainless steel tool works for any weight bullet in the assigned calibers to create a burr free hollow point with no damage done to the bullet. Used by some of the top shooters in the world for 1,000 yard bench-rest, high power and long range hunting.
Technical Information
Notes: consists of a caliber-specific tool body, a cutter and a hollow-point deburring tool
Montour County Rifles Meplat Uniforming Tool allows the re-loader to equalize the ballistic coefficient (B.C.) of any kind weight bullet. This is done by removing the uneveness of a bullets meplat. (the nose of bullet) By uniforming the meplat you are reducing the B.C. of that type of bullet by approximately 2%, which is equivalent of less than 1/4 minute of angle sight adjustment. However you are creating a more consistent projectile, bullet to bullet and shot to shot, thus creating smaller groups. Any inconsistencies in your ammunition are magnified at extended ranges, therefore this process will eliminate one more variable in extreme accuracy reloading.
Montour County Rifles Meplat Uniforming Tool is comprised of a 303 Stainless Steel body, precision machined from one piece, to exceptionally tight tolerances for absolute squareness and repeatability. Bullets are held by a taper, caliber specifically bored into the uniformers body, and then polished so as absolutely NO DAMAGE is done to your bullet. Positively no type of plastic is used, this helps avoid in the over all length variances commonly occuring with other types of uniformers that use plastic bodies and/or inserts that expand while holding the bullet.
What sets Montour County Rifles Meplat Uniforming Tool apart from the others is we are the first to utilize the secondary portion of meplat uniforming. When cutting the meplat small burrs are pushed inside of the hollow point portion of match bullets. By utilizing the center de-burring tool these burrs can now be removed and an even countersink left in their place. This will remove any and all inconsistencies in your bullets meplat.
The Montour County Rifles Meplat Uniforming Tool is currently being used by some of the top shooters around the world in 1,000 yard bench-rest, high power, F-class, long-range hunters and many other facets of shooting. If you are serious about minimizing you groups, and having more consistent shot to shot accuracy, especially at extended ranges, you simply cannot afford to skip this step.
Calibre | .223/4 Cal |
---|---|
Type of product | Meplat Trimming |
Barcode | mcr-mep224 |
SKU | mcr-mep224 |
Brand | MCR |
FAQ - Frequently Asked Questions
Welcome to our purchasing FAQ! Here you'll find answers to our most asked questions regarding purchasing from us. If you are after Reloading FAQ's, please click HERE, where you can find more specific question and answers. Still can't find quite what you're looking for, or have something we should know? Send us an email, we're happy to help!
-
Q1: Do you ship to my country?
A1: European countries (All items except Ammunition, Powders, Primer, Cases & Projectiles)
-
Q2: How much do I pay for shipping?
A2: The shipping charge will be added to your order and visible on your receipt before you check out. The shipping is based on the destination country. You’ll get free shipping on orders above a certain amount.
Free shipping on orders above: £50 for mainland UK next day deliveries.
France - £25
Norway – £45
Finland – £46
Germany – £25
UK – £5 (Free UK Mainland with purchases over £50)
Rest of the EU – £25-100
Global – £100-200 -
Q3: What are the accepted payment methods?
A3: We accept online card payment with MasterCard, VISA, Worldpay or Bank Direct Debit
-
Q4: What currency do I pay in?
A4: The currencies used are GBP, EUR & USD The currency is chosen automatically depending on your shipping country.
-
Q5: When do I receive my order?
A5: We dispatch all orders in 1-2 business days with DPD & Parcelforce, delivery time will depend on the shipping country and address.
-
Q6: Do I have to pay international taxes and duties?
A6: Your order may be subject to import duties and taxes, which are levied once a shipment reaches your country. We cannot control and is not responsible for any duties/taxes applied to your package upon delivery. You will be responsible for paying additional charges for customs clearance. Customs policies vary widely from country to country; please contact your local customs office for further information.
Rifle Calibre Name | Common Metric Name | Bullet Diameter |
.17 | 4.5mm | .172" |
.204 | 5.2mm | .204" |
.223 | 5.56mm | .224" |
.22 (Rimfire) | 5.6mm | .223" |
.22 (Centrefire) | 5.6mm | .224" |
.243 | 6mm | .243" |
.257 | 6.53mm | .257" |
.260 | 6.5mm | .264" |
.270 | 6.8mm | .277" |
.280 | 7mm | .284" |
.30 | 7.62mm | .308" |
.325 | 8mm | .323" |
.33 | 8.6mm | .338" |
.366 | 9.3mm | .366 |
.375 | 9.5mm | .375" |
.416 | 10.6mm | .416" |
.50 | 13mm | .510" |
Ratings & Reviews
Be the first to review this product