Be the first to review this product
L.E. Wilson has been making precision reloading tools for over 80 years. Chamber Type Seater Dies are noted for precise accuracy. Both the bullet and case are firmly held in perfect alignment as the bullet is seated in the case. Seater die blanks allow reloaders to have a custom die made by their gun smith to exacting standards for the ultimate in precision hand loading. These seater dies are hand-die design for use with a mallet or an arbor press and will not work in a conventional press.
LE Wilson Bullet Seater Blanks come with Cap Stem and Base. The bore hole is finished and the blank is made long so you may cut it to the correct length. A pilot hole is drilled through to the finished bore.
Note: Please have experience with machine work or talk to your local gunsmith for more information on how to finish these dies.
Technical Information
Material: Steel
Die Type: Bullet Seating Die
Notes:
- This is a die blank and the cartridge chamber will still have to be cut by a competent gun smith
- Die positively controls both bullet and cartridge case alignment.
- Bullet is pushed into the case mouth by a close-fitting bullet seating stem.
- This die works in an Arbor or hand press only.
Write your review
About the L E WILSON CHAMBER TYPE SEATING DIE BLANK inc vld seating stem - [wils-cb-25] - .25 CalMore Information
Calibre | .35 Cal |
---|---|
Type of product | Die Blanks |
SKU | wils-cb-25v |
Brand | Wilson Tools & Gauges |