Includes power adapter and aluminum handle.

Select the correct Mandrel (Pilot) and install in tool; the amount of Pilot protrusion can be adjusted for proper neck length. Caution: Do not "crash" the hardened Pilot and Cutter together. Index marks are stamped on body and adjustment knob. Rotate adjustment clockwise to advance the cutter. Each index mark (30° apart) equals .0002" Cutter movement. Initial setting of cutter is done by completely removing the cutter and adjustment knob. (Loosen Cutter clamp screw.) Screw Cutter half way or more into knob; install this assembly into tool. (Pay attention to Cutter orientation). With only gentle pressure, push the adjustment knob into tool while turning it counter clockwise. You will see the cutter quickly advance toward the pilot. Continue until the cutter is .025" to .050" from the Pilot. Then turn the adjustment knob clockwise and the Cutter will advance at a slower rate of .002" per turn. Slip a case on the pilot and continue to turn the adjustment knob clockwise until it touches brass. Simply advance it to remove the desired amount of brass. (Tighten Cutter clamp screw.) It is proper to turn each case twice at same setting to get the desired dimension.

Clamping case in shell holder can be done hand tight or a cross pin hole is provided so you can use the Allen wrench for additional leverage. Never use the power adapter with a high speed drill - use only a cordless screwdriver, slow speed drill, or by hand. A dab of Imperial Die Wax on the Pilot will ease the turning. Do not use the Pilot dry - lube is required or the brass will gall. High speed will generate too much heat and steel expands (cal. 30 pilot .0001"/50°F). Metal must be kept cool for any precision machining. This operation is no exception

More Information

More Information
Calibre	.416 Cal
Type of product	Neck Turning Kits
SKU	km-416nt-comp-kit
Brand	KM Precision

Reviews

Ratings & Reviews

Be the first to review this product

FAQ

FAQ - Frequently Asked Questions

Welcome to our purchasing FAQ! Here you'll find answers to our most asked questions regarding purchasing from us. If you are after Reloading FAQ's, please click HERE, where you can find more specific question and answers. Still can't find quite what you're looking for, or have something we should know? Send us an email, we're happy to help!

Q1: Do you ship to my country?

A1: European countries (All items except Ammunition, Powders, Primer, Cases & Projectiles)
Q2: How much do I pay for shipping?

A2: The shipping charge will be added to your order and visible on your receipt before you check out. The shipping is based on the destination country. You’ll get free shipping on orders above a certain amount.

Free shipping on orders above: £50 for mainland UK next day deliveries.

France - £25
Norway – £45
Finland – £46
Germany – £25
UK – £5 (Free UK Mainland with purchases over £50)
Rest of the EU – £25-100
Global – £100-200
Q3: What are the accepted payment methods?

A3: We accept online card payment with MasterCard, VISA, Worldpay or Bank Direct Debit
Q4: What currency do I pay in?

A4: The currencies used are GBP, EUR & USD The currency is chosen automatically depending on your shipping country.
Q5: When do I receive my order?

A5: We dispatch all orders in 1-2 business days with DPD & Parcelforce, delivery time will depend on the shipping country and address.
Q6: Do I have to pay international taxes and duties?

A6: Your order may be subject to import duties and taxes, which are levied once a shipment reaches your country. We cannot control and is not responsible for any duties/taxes applied to your package upon delivery. You will be responsible for paying additional charges for customs clearance. Customs policies vary widely from country to country; please contact your local customs office for further information.

Ten Commandments

Set up your reloading bench where it (and stored components) will not be exposed to heat, sparks or flame.
Establish a comfortable loading procedure and don't vary it.
Keep your reloading bench, equipment and area clean and uncluttered. Label components and reloads for safe, easy identification. Never use powder from an unlabelled tin.
Understand what you are doing and why it must be done in a specific way.
Follow loading recommendations exactly. Don't substitute components for those listed in metallic data without reducing the load and working back up.
Never substitute smokeless powder for black powder or Pyrodex because smokeless powder is much more powerful than black powder. Never mix two powders together.
Wear safety glasses.
Stay alert when reloading. Don't reload when distracted, disoriented or tired.
Don't smoke, drink alcohol or take drugs while reloading or while in your reloading area.
Keep everything out of reach of small children.

Calibre Identification

Rifle Calibre Name	Common Metric Name	Bullet Diameter
.17	4.5mm	.172"
.204	5.2mm	.204"
.223	5.56mm	.224"
.22 (Rimfire)	5.6mm	.223"
.22 (Centrefire)	5.6mm	.224"
.243	6mm	.243"
.257	6.53mm	.257"
.260	6.5mm	.264"
.270	6.8mm	.277"
.280	7mm	.284"
.30	7.62mm	.308"
.325	8mm	.323"
.33	8.6mm	.338"
.366	9.3mm	.366
.375	9.5mm	.375"
.416	10.6mm	.416"
.50	13mm	.510"