01263 739923 Phone lines are open till 10 pm, 365 days a year - The shop is open from Mon - Fri (7.30 am - 4 pm)

Neck Turning

Spud says..."There are two main instances for possibly needing to neck turn. One instance is when we would do a cleaning cut, this is where we aim to clean up 80% of the neck surface. This process will help even out the thick and thin parts in the wall thickness. When we are using bushing dies to control our neck tension, this type of neck turning will aid a more uniform neck tension and grip on the projectile. The second instance would be for taking the neck thickness down to a desired thinner wall thickness, for use in so called tight neck chamber guns"


As said above neck turning can be used for two separate scenarios. Most brands will have their own dedicated parts to their kits and its best practice to not mix match these if possible.

Neck turning will work best when you are using a bushing style sizing die. Wilson, Redding, RCBS, Hornady and Forster all make this style of die. It is worth remembering when consirdering your bushings for these dies, that you will want a smaller size after turning.

Always size after neck turning!.
View as

Items 1 to 24 of 35 total

24
  • 12
  • 24
  • 36
  • 72
  • All
per page
Filters
  • Position
  • Name
  • Price
  • Brand
  • Calibre
Position
  1. SINCLAIR STAINLESS NECK TURNING MANDREL

    SKU sinc-749******

    25 In Stock

    As low as £21.00
  2. SINCLAIR CARBIDE NECK TURNING MANDREL

    SKU sinc-CNTM749******

    Available on backorder

    As low as £55.00
24
  • 12
  • 24
  • 36
  • 72
  • All
per page
© 2024 1967spud Reloading Supplies Ltd. All rights reserved. | All prices include VAT. 153724219 | Company registered in England and Wales No 09475093 | RFD 36/2491 Norfolk.